Algorithm level

Cooley–Tukey Fast Fourier Transform, radix-2 case

From Algowiki
Revision as of 14:51, 10 February 2016 by ASA (talk | contribs)
Jump to navigation Jump to search


Cooley–Tukey Fast Fourier Transform, radix-2 case
Sequential algorithm
Serial complexity [math]O (n log_{2} n)[/math]
Input data [math]n[/math]
Output data [math]n[/math]
Parallel algorithm
Parallel form height [math]O (log_{2} n)[/math]
Parallel form width [math]n[/math]

Primary authors of this description: A.V.Frolov, Vad.V.Voevodin (Section 2.2)

1 Properties and structure of the algorithm

1.1 General description of the algorithm

Simple Cooley-Tukey algorithm is a variant of Fast Fourier Transform intended for complex vectors of power-of-two size and avoiding special techniques used for sizes equal to power of 4, power of 8, etc.[1] The algorithm repeatedly applies the Fast Fourier Transform and reduces the entire process to a sequence of Fourier transforms of size 2 and multiplications by the so-called twiddle factors. It is slower than Cooley-Tukey algorithms that express a power-of-two size as a power of 4, power of 8, etc. and then use special features of these cases. Nevertheless, this algorithm is widespread for the reason that its program implementation is the simplest of all FFT implementations.

1.2 Mathematical description of the algorithm

Input data: complex vector to be transformed [math]a[/math] (with components [math]a_{i}[/math]).

Output data: complex vector [math]b[/math] (with components [math]b_{i}[/math]), the result of the transform

The size (dimension) of the vectors is [math]n[/math]; moreover, [math]n = 2^l[/math]

1.2.1 Recursive description

The input vector is first written as a sequence of rows, each row containing only two components. Then each row undergoes the Fourier transform of size two. The resulting elements are multiplied by the twiddle factors [math]exp (2 \pi i(m-1)(j-1)/n)[/math] ([math]m[/math] is the row index, and [math]j[/math] is the column index). Finally, each column is processed by the FFT of size [math]n/2[/math]. For the first column, the twiddle factors are equal to 1; hence, no actual multiplication is performed. For the second column, the multiplication by the twiddle factors is combined with the Fourier transform of size two. This combination, called a butterfly by the FFT experts, is the basic operation of the simple Cooley-Tukey algorithm. The butterfly consists in adding two complex numbers and calculating their difference with the subsequent multiplication by another complex number. On the whole, there are [math]n/2[/math] butterflies at each step, while the number of steps is [math]l-1[/math]. Only sums and differences are calculated at the last step [math]l[/math].

1.2.2 Trigonometric functions

Although the calculations described above use the twiddle factors [math]exp (2 \pi i(m-1)(j-1)/n)[/math], it is unreasonable to calculate them while executing the Cooley-Tukey algorithm. Otherwise, the calculations of sines and cosines would constitute the lion's share of all calculations in the algorithm. Usually (and similarly to the other versions of FFT), the twiddle factors are pre-calculated and stored in a separate array. We assume here that the algorithm is executed in exactly this form.

1.3 Computational kernel of the algorithm

The computational kernel of the algorithm is compiled of butterflies. Each butterfly consists in adding two complex numbers and calculating their difference with the subsequent multiplication by another complex number. There are on the whole [math](1/2) n log_{2} n [/math] butterflies. No multiplications are performed in [math]n/2[/math] butterflies.

1.4 Macro structure of the algorithm

The macro structure of the algorithm can best of all be described in a recursive manner, namely, as [math]n/2[/math] Fourier transforms of size two, the multiplication of [math]n/2[/math] pairs of complex numbers, and two FFTs of size [math]n/2[/math].

1.5 Implementation scheme of the serial algorithm

Under the nonrecursive organization scheme, the execution of a butterfly is preceded by partitioning the components into [math]n/2[/math] pairs (there are on the whole [math]log_{2} n [/math] butterflies). At each step, the difference of indices of the elements in a pair is doubled. This difference is 1 at the first step and [math]n/2[/math] at the last step. The result of addition is written into the component with a lesser index, while the result of subtraction and subsequent multiplication is written into the component with a larger index.

1.6 Serial complexity of the algorithm

If the serial complexity is determined by considering only the principal terms of the number of operations, then the simple Cooley-Tukey algorithm requires [math]n log_{2} n[/math] complex additions and [math](1/2) n log_{2} n [/math] complex multiplications. Thus, the simple Cooley-Tukey algorithm can be qualified as a linear logarithmic complexity algorithm.

1.7 Information graph

Figure 1. The simple Cooley-Tukey algorithm for n=8. Op+ denotes the addition of two complex numbers, while Op- denotes the subtraction of two complex numbers followed by multiplying the result by another complex number (a twiddle factor). No multiplications occur in the last column. The vertices of the graph correspond to the parameter of the outer loop along the horizontal axis and the components of the array along the vertical axis.

It is evident from the figure that this graph is not linear either in the size or in formulas for its edges. The size of the graph is linear logarithmic, while the edge formulas contain exponentials. At the i-th step, each butterfly involves two components whose indices in their binary representation differ only in the (i-1)-th bit.

1.8 Parallelization resource of the algorithm

If only the principal terms of the number of operations are considered, then the simple Cooley-Tukey algorithm has a critical path formed of [math]log_{2} n [/math] complex additions/subtractions and [math]log_{2} n [/math] complex multiplications. Thus, in terms of parallel complexity, the simple Cooley-Tukey algorithm can be placed into the logarithmic class. In terms of the parallel form width, the complexity of the algorithm is "linear.

1.9 Input and output data of the algorithm

Input data: vector [math]a[/math] (with components [math]a_{i}[/math]).

Size of the input data: [math]n[/math] .

Output data : vector [math]b[/math] (with components [math]b_{i}[/math]).

Size of the output data: [math]n[/math].

1.10 Properties of the algorithm

It is clear that, in the case of unlimited resources, the ratio of the serial to parallel complexity is linear.

The computational power of the algorithm, understood as the ratio of the number of operations to the total size of the input and output data, is logarithmic.

The algorithm is completely determined.

Note that the simple Cooley-Tukey algorithm is not optimal even for vectors of power-of-two size. However, we do not consider any other FFT algorithms here.

2 Software implementation of the algorithm

2.1 Implementation peculiarities of the serial algorithm

In its simplest form, the algorithm can be written in Fortran so that the input and output arrays are the same (the X array is used in this example):

         
        subroutine STEP2(x,y,pov)
        complex x, y, pov, u, v
        u = x + y
        v = (x-y)*pov
        x = u
        y = v
        return
        end
        subroutine FFT2(X, POV, N, N2, L)
C
C L = Log2N
C N2 = N/2
C
        complex X(0:N-1), POV(0:N2-1)
        DO I = 0, L-1
            DO J = 0, N2/2**I-1
            DO K = 0, 2**I-1
                call STEP2(X(2*J*2**I+K)), X(2*J*2**I+2**I+K), POV(J*2**I-1))
            END DO
            END DO
         END DO
         return
         end

We assume that first-step pivot multipliers (they are also used in subsequent steps) have been pre-computed in advance and are stored in a POV array (with its zero element containing 1). Unfortunately, most implementations of the simple Cooley-Tukey algorithm compute the pivot multipliers simultaneously with “butterfly” computations, which substantially reduces performance.

2.2 Locality of data and computations

2.2.1 Locality of implementation

2.2.1.1 Structure of memory access and a qualitative estimation of locality
2.2.1.2 Quantitative estimation of locality

2.3 Possible methods and considerations for parallel implementation of the algorithm

2.4 Scalability of the algorithm and its implementations

2.4.1 Scalability of the algorithm

2.4.2 Scalability of of the algorithm implementation

2.5 Dynamic characteristics and efficiency of the algorithm implementation

2.6 Conclusions for different classes of computer architecture

Of all communication networks, a simple Cooley-Tukey algorithm graph is best reflected on a hypercube type network. The popularity of FFT as a method to address various tasks has therefore popularized the idea of computational systems with a hypercube-type network at the early development stage of various parallel computing systems. Currently, however, these computing systems are not commonly used for physical reasons making a large-dimension hypercube hard to implement in practice. As can be seen from the graph, if it is split into parts by straight lines parallel to the step axis, at the first step there will be no exchange of information between the different parts. But starting at some point, these will grow to an amount comparable to the number of arithmetic operations. This, however, can be avoided by reordering all data in the middle of the algorithm. In the graph, this corresponds to changing the splitting procedure. When these recommendations are followed, the algorithm can be implemented more efficiently than it is at present, and including the use of cluster architecture and other architectures that split a process into independent branches.

2.7 Existing implementations of the algorithm

Simple Cooley-Tukey Fast Fourier Transform algorithm for the powers of two is very common among beginners using FFT, and can easily be found online using search engines. As a result, these implementations do to use the efficiency improvement techniques described above – for sequential or parallel architecture. The reason is that the simple Cooley-Tukey Fast Fourier Transform algorithm for the powers of two is not as good as other Cooley-Tukey algorithms using, for example, the specifics of even powers of two for better efficiency. Therefore most researchers who need faster FFT programs do not try to improve the efficiency of this algorithm, but choose another instead. We recommend that our readers do the same.

3 References

  1. Voevodin V.V., Kuznetsov Yu.A. Matrices and computations, Moscow: Nauka, 1984.