Algorithm level

LU decomposition via Gaussian elimination

From Algowiki
Jump to navigation Jump to search


Primary authors of this description: Vad.V.Voevodin (Section 2.2), A.M.Teplov (Section 2.4)

1 Properties and structure of the algorithm

1.1 General description of the algorithm

1.2 Mathematical description of the algorithm

1.3 Computational kernel of the algorithm

1.4 Macro structure of the algorithm

1.5 Implementation scheme of the serial algorithm

1.6 Serial complexity of the algorithm

1.7 Information graph

1.8 Parallelization resource of the algorithm

1.9 Input and output data of the algorithm

1.10 Properties of the algorithm

2 Software implementation of the algorithm

2.1 Implementation peculiarities of the serial algorithm

2.2 Locality of data and computations

2.2.1 Locality of implementation

2.2.1.1 Structure of memory access and a qualitative estimation of locality
Figure 2. Gaussian forward decomposition method of a system of linear equations. Overall memory call profile

Fig.2 shows the memory call profile for the forward Gaussian decomposition of a system of linear equations. Like the source code, the figure shows that the program involves two primary arrays of data: calls to elements of the first array are marked in green (Fragment 1); all other calls are to elements of the second array. It is clear that the program has a complex profile. The main conclusion that can be made from this figure is the iterative nature of the profile, where each subsequent iteration contains fewer calls. This is particularly clear from Fragment 1.

Next, as you know, the Gaussian method discards one line from the linear system of equations with each iteration. This is also clear from Fig.2: each iteration (one of which is selected as Fragment 2) consists of a series of memory calls related to the line being discarded (Fragment 3), after which these elements are no longer addressed. It can also be seen that fragments similar to Fragment 3 are becoming smaller with each subsequent iteration, both in terms of the number of calls and number of elements addressed.

However, this general picture is very difficult for providing a qualitative assessment of data locality. Let’s move to a more detailed view of Fragment 1, which corresponds to the access to one of the two data arrays in memory.

Figure 3. Fragment 1 (First array memory call profile)

Fig.3 shows a detailed view of Fragment 1, highlighted in green in Fig.2. The picture looks curious: based on Fig.2, the impression was that this profile consisted of two different cycles of iterations, with the first cycle iterations being substantially shorter than second cycle iterations. In fact, Fig.3 shows that the profile consists of the same type of iterations, reading the array elements sequentially. With each subsequent iteration, the element with the smallest index is discarded. The illusion of two different cycles is created solely by the number of calls to the other array – when the number of such calls is high, the iteration for this fragment looks longer. Fragment 1 (as shown in Fig.3) has only about 1,200 memory calls, while the entire profile has 34,000 calls. That is, the first array accounts for just 3.5% of all memory calls in the program.

Since this profile is based on a sequential search through the array elements, we can say the fragment has high spatial locality. And since there are many iterations searching through array elements, it is clear that temporal locality is also high.

Now let’s review the memory call profile for the second array, which is substantially larger and more complex than the first profile. Fig.4 shows a detailed view of Fragment 2 as highlighted in Fig.2. This fragment consists of four parts, highlighted in orange.

Figure 4. Fragment 2 (an iteration of memory calls to the second array)

Part 1 looks like a cyclic sequential search through a small part of the array elements, and a closer look shows this is indeed the case. Fig.5 shows a close-up of Fragment 2 which is highlighted in blue in Fig.4. This close-up also shows that Part 2 is nearly identical to a sequential search of all elements of this array. Thus, both parts have very high spatial locality (due to the sequential search). Part 1 also has high temporal locality, as the search is repeated in a cycle, unlike part 2, where each element is only addressed once.

Part 3 consists of only a few memory calls, and represents a sequential search of all array elements with a very large interval – much larger than in Part 2. In this case, due to the high interval, spatial locality is low and there is no temporal locality either as the search is only done once.

Part 4 represents another sequential search through a small part of the array, the size of which equals the number of discarded array elements; the closer to the end of the profile, the more memory calls are there in part 4. This part has the same locality properties as Part 2. The only difference is in the size, but it does not affect the locality much.

When viewing Fragment 2 in general, the main impact comes from parts 1 and 2; therefore we can say this fragment has high temporal and spatial locality. However, with subsequent iterations (see Fig.2) locality will generally be decreasing as each iteration discards several elements.

Figure 5. Close-up view of Fragment 2
2.2.1.2 Quantitative estimation of locality

The key implementation fragment which was used to obtain a quantitative assessment is presented here (Kernel1 function). Launch conditions are described here.

The first estimate is based on daps, which assesses the number of memory access operations (reads and writes) per second. Similar to flops, this tool is used to evaluate memory access performance, rather than locality. But it is still a good source of information, particularly in combination with the next estimate – cvg.

Fig.6 shows the daps values for various implementations of common algorithms sorted in ascending order (larger daps values generally mean higher performance). You can see that the blue column, which corresponds to the Forward Guassian method, is located in the right part of the chart indicating high performance, a little lower than the Linpak test performance. It should also be noted that the daps value for this task is almost equal to the daps value for the entire Gaussian method (“gauss” column), which combines the forward and reverse methods. This is due to the fact that reverse method has a much lower number of memory calls than forward method, so its impact is limited.

Figure 6. Comparison of daps values

The second tool – cvg – is intended to obtain a more machine-independent locality assessment. It determines how often a program needs to pull data to cache memory. Respectively, the smaller the cvg value, the less frequently data needs to be called to cache, and the better the locality.

Fig.7 shows cvg values for the same set of implementations, sorted in descending order (lower cvg generally means higher locality). You can see that according to this assessment, just as with daps, the forward Gaussian method has high locality. The Linpak test offers comparable results as well. Interestingly, the ranking for the forward method and a combination of the forward and reverse methods together (“gauss” column) are almost the same.

Figure 7. Comparison of cvg values

2.3 Possible methods and considerations for parallel implementation of the algorithm

2.4 Scalability of the algorithm and its implementations

2.4.1 Scalability of the algorithm

2.4.2 Scalability of of the algorithm implementation

Figure 8. Scalability of the forward Gaussian method parallel implementation. Maximum performance.
Figure 9. Scalability of the forward Gaussian method parallel implementation. Maximum efficiency.

The set of variable launch parameters for the algorithm implementation and limits for the algorithm parameter values:

  • Number of processors [4 : 256]
  • Matrix size [1024 : 5120]

Efficiency of algorithm implementation execution

  • Minimum efficiency 0.11%
  • Maximum efficiency 6.65%

Scalability evaluation:

  • By the number of processes: -0.000101 – as the number of processes increases, overall efficiency declines in the area considered, even though not as intensely as when the task size increases. Considering the 6.5% difference between the maximum and minimum efficiency, we can conclude that the efficiency reduction is most likely quite uniform within the area considered. The efficiency reduction is explained by the fact that as computing power grows, so does the volume of data sent back and forth. Some efficiency increases can be present at all matrix sizes considered. This can be due to increases in the program’s computational complexity, which results in overall efficiency growth given fixed overhead costs for organizing parallel computing.
  • By task size: –0.0674 – as the task size grows, efficiency generally decreases within the area considered. This can be explained by the fact that as the task size is increased, so does the overhead cost of organizing parallel computing. As efficiency reduction along this axis is more intense than with an increase in the number of processes, the efficiency drop will most likely be more intense with a smaller number of processes than in existing areas of increasing efficiency with a larger number of processes.
  • In both directions: –6.621e-05 – as both computational complexity and the number of processes increase throughout the area considered, efficiency falls, but at a very low rate. Given that the difference between maximum and minimum efficiency at the given range of parameter values is under 6.5%, this shows that if there are any areas on the surface with a very intense change of efficiency, they will have a small area. On the rest of the surface, efficiency changes are small and are located at about the same level.

Parallel implementation examined in C

2.5 Dynamic characteristics and efficiency of the algorithm implementation

2.6 Conclusions for different classes of computer architecture

2.7 Existing implementations of the algorithm

3 References